SKU: 3094831

Hörmann series 40 / 50 industrial sectional door | 142 mm | Torsion spring with plastic tube and tension cone

Name: Hörmann series 40 / 50 industrial sectional door | 142 mm | Torsion spring with plastic tube and tension cone
Brand: Hörmann
SKU: 3094831
Price: 675.0 EUR
Availability: InStock

€675,00

Tax included Shipping calculated at checkout.

Hörmann torsion springs series 40/50 | Industrial sectional door | all variants

Authentic replacement torsion springs for Hörmann industrial sectional doors of series 40 and 50 with plastic tube and tension spring . Ideal for spring breakage repairs, modernization and maintenance – including a wide selection of variants according to Hörmann markings (R/L 228–329 & 510–526).

🔧 Technical data – Series 40/50 Torsion spring system

Manufacturer type:
Hörmann industrial sectional door, series 40/50

Spring type:
Torsion spring with plastic tube and tension spring

Area of application:
Industrial sectional doors, commercial gate systems, larger garage complexes

Compatibility:
Hörmann BR 40 / 50 (version with torsion spring shaft)

Components:
Torsion spring, plastic tube, tension spring, fasteners

Winding direction:
Right-handed (R) and left-handed (L) variants available

Material:
Spring steel, corrosion-protected, powder-coated / finished

Safety version:
Design with defined load cycles according to manufacturer's calculations

🛡️ Important safety notice – always replace both springs!

For safety reasons, both Hörmann torsion springs of the 40/50 series must always be replaced together. The spring calculation is performed by the manufacturer based on a defined number of load cycles. If one spring breaks, the second spring is usually already close to its own breaking point.

If only one side is replaced, the remaining old spring can break suddenly and without warning . This endangers people, damages gate leaves, fittings, and drive mechanisms, and poses a significant workplace safety risk. Tormeister 24 therefore strongly recommends: Always replace both torsion springs as a set!

📌 Variants & Identification – How to choose the right Hörmann spring

Hörmann uses an R/L code identification system for the 40/50 series. You can usually identify the correct spring by:

the aluminum flag directly on the spring (e.g. R228, L232, R510, L526 etc.), or
the gate's type plate (series, gate size, design).

If neither the aluminum flag nor a clear marking is visible, simply send us a photo of the type plate and – if possible – of the spring area. The Tormeister 24 team will assist you with the exact identification.

Markings (excerpt of variants)

R228 R229 R230 R231 R232 L232 R310 L310 R311 R312 R313 R314 R315 R316 R317 L317 R318 R319 R320 R321 R322 R323 R324 R325 R326 L326 R327 R328 R329 L329 R510 L510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R523 R524 R525 R526 L526

In the shop, these markings are listed as the variant option "Marking" . Simply select the label that is printed on your existing spring or aluminum tag.

💪 Advantages of the Hörmann torsion springs series 40/50

Original system for Hörmann series 40/50 industrial sectional doors.
Designed for defined load changes – ideal for frequently used gate systems.
Version with plastic tube and tension spring for an additional level of safety.
Smooth gate movement and optimal power transmission in the torsion spring system.
High operational reliability with correct installation and replacement in pairs.
Professional support from Tormeister 24 in selection & assignment.

⚙️ Application & Assembly – Workplace safety first

The torsion springs of the Hörmann 40/50 series are located on the spring shaft above the door leaf and compensate for the weight of the sectional door. They are highly pre-tensioned and released with each opening and closing cycle – the springs are therefore constantly under high mechanical energy.

Important basic rules:

Always replace both springs of a gate system together.
Use only suitable clamping tools and safety devices.
Use personal protective equipment (gloves, safety glasses, stable ladder).
Always disconnect the power to the gate drive before working on the spring shaft.
If you are unsure or lack experience: Have work carried out exclusively by a specialist company.

Note from goalkeeper 24:
Torsion springs are safety-critical components. Improper work on spring shafts, clamping sleeves, or clamping pins can lead to serious injuries. If you are not absolutely certain, be sure to consult a professional – our team will be happy to assist you with selection and organizing the installation.

🏁 Practical example from everyday industrial life

In a logistics facility with several Hörmann 40/50 series industrial sectional doors, a spring broke on one of the doors. On-site inspection revealed that the second spring was already showing significant signs of fatigue. By consistently replacing both torsion springs in pairs, including new tension springs and plastic tubing, the door system was safely put back into operation – with significantly smoother operation, consistent spring action, and restored workplace safety for personnel.

🔗 Matching categories & accessories at Tormeister 24

❓ FAQ – Frequently Asked Questions about Hörmann Torsion Springs BR 40/50

How do I find out which Hörmann torsion spring I need?

First, check the aluminum tag on the spring – the identification code is usually located there (e.g., R228, L317, R510, L526). If there is no tag, please send us a photo of the gate's type plate and – if possible – of the spring area. Tormeister 24 will help you select the correct version.

Do I really always have to replace both springs?

Yes. The springs are designed by the manufacturer for a specific number of load cycles. If one spring breaks, the second spring is usually close to reaching the same load limit. For safety reasons , replacing them in pairs is strongly recommended .

Can I install the Hörmann torsion springs myself?

Torsion springs are under high tension. Improper handling can lead to serious injuries. Installation should only be carried out by trained professionals using appropriate tensioning tools and safety equipment.

What is meant by plastic pipe and tension spring?

In many Hörmann systems, the torsion spring is supplemented by a plastic tube and a tension spring . These components serve for protection, guidance, and reliable force transmission. When replacing a spring, these components should also be inspected and replaced if necessary.

What do I do if the gate can no longer be moved?

If torsion springs break, the gate leaf may become difficult or even impossible to move. Do not force the gate open, secure the area, and contact our Tormeister 24 service team for technical advice.

🛒 Request a quote for Hörmann BR 40/50 torsion springs now

Do you need a replacement for a Hörmann torsion spring, series 40/50, with a plastic tube and tension spring? Select your identification number in the variant field or send us a photo of your nameplate – the Tormeister 24 team will support you with selection, safety, and the right solution for your gate system.

Request technical advice & a quote

Delivery information

Shipping options | Costs & delivery times

Germany

- 5,90 € (1 - 8 working days)

- Order value from 300,00 € free of charge (1 - 8 working days)

- Garage doors free of charge (4-5 weeks)

Austria

- 13,00 € (1 - 8 working days)

- Order value from 300,00 € free of charge (1 - 8 working days)

- Garage doors 90,00 € (4-5 weeks)

Luxembourg

- 13,00 € (1 - 8 working days)

- Order value from 300,00 € free of charge (1 - 8 working days)

- Garage doors free of charge (4-5 weeks)

Countries we ship to
Germany, Austria, Luxembourg*

*excluding islands

Delivery information for gates and doors

Pickup information:
Ordering and collection: Order online and collect the gate personally from our warehouse.

Delivery notice: The delivery notice provided by us after production is provisional and not legally binding. Deviations, e.g. due to traffic volumes or disruptions, do not give rise to claims for complaint.

Conditions for free freight of gates and doors:

-Please provide your mobile number when ordering
- Please ensure that someone is present to receive the goods on the scheduled delivery date. If someone is not present, please contact us.
- Our delivery is made with a truck combination of 18 meters in length.
- For unloading with a truck-mounted forklift we need sufficient space around the vehicle.
- Your address must be accessible; consider access roads, tight curves, posts, overhanging trees, etc.

Important points:
- The driver unloads the goods at the address specified when ordering.
- Unloading at other locations is the responsibility of the customer; we are not liable for damage at unsafely chosen unloading locations.
- If there are problems with space for unloading with the truck-mounted forklift, please ensure that there are enough unloading personnel available in advance.

Special cases:
- If your address cannot be reached by truck, please contact us before ordering to ensure optimal delivery and avoid damage.

If you have any further questions or special cases, please do not hesitate to contact us.