Sliding gate drives in the ultimate comparison
Sorted by door weight and performance – including speed, controls and direct accessory recommendations.
The most important selection criteria
- Door weight & width: determines the drive class (500/600/700/800/1100/1300 kg).
- Voltage & duty cycle: 24 V DC for frequent cycling/fine control, 230/400 V AC for heavy industry.
- Speed: 12–25 cm/s; faster = shorter waiting times.
- Control: CBX (24/230 V), CS 320 (industrial, optional FU & inductive).
- Accessories: racks (module 4), light barriers, safety edges, emergency power, warning light.
Tip: Always factor in reserves (approx. 20%) – especially in the case of wind loads, slopes or high usage frequency.
Large comparison table (sorted by max. door weight)
| Model / Set | Tension | max. gate weight | Power / torque | speed | steering | Special features | Recommended accessories | link |
|---|---|---|---|---|---|---|---|---|
| Marantec CBX10324F (24 V DC, bi linked) | 24 V DC | up to 500 kg | – | – | CBX10324F | bi·linked radio, quiet operation | Rack plastic/steel core , one-way light barrier , warning light | All details |
| Marantec CBX102B (230 V AC) |
230 V-AC (closing edge security (Advanced) |
up to 500 kg | 16 Nm | 16 cm/s | CBX102B | robust & proven | Plastic rack , reflective light barrier , warning light | All details |
| Marantec column drive set (1.28 m) | 24 V DC | up to 600 kg | 800 N | 18 cm/s | integrated | compact column solution | Rack , light barrier , battery pack 24 V | All details |
| Marantec column drive set (1.53 m) | 24 V DC | up to 600 kg | 800 N | 18 cm/s | integrated | more height for slopes | Rack steel , reflection LS | All details |
| Marantec CBX10324 Set | 24 V DC | up to 700 kg | 26 Nm | 25 cm/s | CBX10324 | fast & powerful | Rack module 4 , battery pack , safety bar | All details |
| Marantec 230 V-AC Set (29 Nm) | 230 V AC | up to 800 kg | 29 Nm | 16 cm/s | CBX102B | solid industrial base | Rack steel galvanized , end cap 8.2 kΩ , weather protection reflector | All details |
| Marantec CBX10324 Set (38 Nm) | 24 V DC | up to 1100 kg | 38 Nm | 20 cm/s | CBX10324 | bi-linked, high reserve | Rack steel , reflection LS , inductive SSG | All details |
| Marantec 400 V AC 1100 kg (CS 320) | 400 V AC | up to 1100 kg | 80 Nm | 18 cm/s | CS 320 (optional inductive) | Industry, M6 spur gear | Plug pin SZ 25.4/35 , safety edge 8.2 kΩ | Standard / Inductive |
| Marantec 230 V AC 1300 kg (CS 320 FU) | 230 V AC | up to 1300 kg | 100 Nm | 12 cm/s | CS 320 with FU | Frequency converter, M6 spur gear | Steel rack , warning light , plug pin SZ 25.4/24 | Standard / Inductive |
Note: Where no exact values are given (–), these are model-dependent or are described in detail on the product page.
Recommendations per weight class
up to 500 kg
up to 600 kg
up to 700–800 kg
up to 1100 kg
up to 1300 kg
Accessories overview
Racks (Module 4)
Light barriers & protection
Safety edges & components
Power & Backup
Assembly & Mechanics
Miscellaneous
Rule of thumb for rack length: Gate width (m) ≈ required rack meters (plus 10–15% reserve).
Buying advice in 5 steps
- Measure the gate: clear opening, gate width, estimated gate weight.
- Select class: up to 500/600/700/800/1100/1300 kg (with reserve).
- Voltage & Application: 24 V DC (fine control/private), 230/400 V AC (industrial/heavy duty).
- Define accessories: racks (module 4), light barrier, safety strip, warning light, battery pack if necessary.
- Check control: CBX (Marantec 24/230 V) vs. CS 320 (industrial, optional FU & inductive).
FAQ
How do I decide between 24 V DC and 230/400 V AC?
24 V DC offers sensitive control, higher switching cycles, and battery operation; 230/400 V AC is ideal for heavy doors and industrial environments.
When do I need an 8.2 kΩ safety contact strip?
Mandatory for 230 V drives, or when the forces exceed the permissible range. If there is a risk of crushing or if required by standards (EN 12453), conduct a risk assessment and use in combination with light barriers.
IMPORTANT: After installation, measure the closing forces on the main and secondary closing edges.
How many racks do I need?
The gate width in meters roughly corresponds to the rack length; allow a 10–15% reserve.
What is “inductive signal transmission”?
For mobile safety edges without trailing cables – clean, durable, low-maintenance.
What are the benefits of a frequency converter (FC)?
Smooth starting/stopping, less wear, precise running – ideal for heavy gates.
Can I retrofit emergency power?
Yes – with the Sommer battery pack 24 V.
