Save energy with door seals – keep drafts out, keep warmth in
For steel doors – and with an adapter band also for wood, plastic, and aluminum. Ideal for basements, logistics, commercial buildings, garages, and side doors.
Why door gap seals make such a difference
Door gaps are small heat leaks – in the fall and winter, these losses add up. A suitable magnetic gap seal reliably closes the bottom edge, reduces drafts, and keeps out dust and unwanted guests.
- Energy efficiency: less heat loss at the bottom edge.
- Hygiene & protection: integrated rodent protection edge helps against mice & co.
- Comfort: noticeably less cold air – employees and goods benefit.
For which doors? (including adapter band)
No drilling required, magnetic: Ideal for steel doors . For wood, plastic, or aluminum, use the self-adhesive MagAdapter Tape SMB 100 as a magnetic base – then the magnetic profiles will grip securely there, too.
To the collection: Door gap seals magnetically shortenable with rodent protection edge
Products & variants – quickly find the right length
Door gap seal 1.0 m
Magnetic, can be shortened, and features rodent protection. Sealing range approximately 4–55 mm – ideal for many side doors.
Suitable for steel doors up to approx. 65 mm thick.
Door gap seal 1.5 m
The "standard door width" ex works. Magnetic, can be shortened, rodent-proof – for hall and cellar doors.
Steel doors up to approx. 65 mm, gap 4–55 mm.
Door gap seal 2.5 m
Extra length for wide doors/double doors. Magnetic, can be shortened, rodent protection.
For larger widths – cut to size on site.
Adapter band for wood/plastic/aluminum
MagAdapter Tape SMB 100 creates a magnetic surface on non-magnetic frames. Self-adhesive , flexible, sold by the meter.
Tip: For side mounting, adapter strips are required on the right and left.
Rodent protection – secure pages
For gates and wide entrances: Rodent protection plates protect the side seals from bite damage – a perfect addition in logistics and production.
Measurement & selection in 5 minutes
- Measure door width (clear width at the bottom edge) → select 1.0 m / 1.5 m / 2.5 m; simply shorten on site.
- Determine the largest gap (check several points) → Seal covers approx. 4–55 mm.
- Check the surface : steel (magnetic) → direct mounting; wood/plastic/aluminum → use adapter tape SMB 100.
- Operating environment : Humidity/dust/rodents? → Protect the rodent protection edge and sides if necessary.
- Fire protection note : Do not install on fire doors.
Quick selection: Standard side door → 1.5 m; basement/side door → 1.0 m; wide commercial door/double-leaf door → 2.5 m.
Quick assembly guide
Preparation
- Clean the lower edge/profile (dry, grease-free).
- Cut to length if necessary, deburr edges.
- For wood/plastic/aluminium: Apply adapter tape SMB 100 and press firmly.
Assembly
- Align the magnetic profile and place it evenly.
- Test latch: Close/open door, check seal.
- Fine-tune, then clean regularly (dust-free = better adhesion).
Locations: basement, logistics, commercial, garage
Cellar & Technology
Stops cold air & odors, fewer insects & humidity – better indoor climate.
Logistics & Hall
More stable temperatures in pre-zones, less dust ingress, protection against gnawing damage.
Garage & side doors
Less draft to the living area, clean separation from the outside space.
Economic efficiency & ROI
A sealed bottom edge quickly and noticeably saves energy. For example, a 1.5 m door with a 20 mm gap adds up significantly per heating season. The seal often pays for itself in a single season, and cleaning and pest control costs are also reduced.
| parameter | Guideline | Practical tip |
|---|---|---|
| Useful life | October–March | Seal frequently used doors first |
| Gap size | 4–55 mm coverable | check the greatest extent at several points |
| material | Steel or adapter band | magnetic = direct mounting |
FAQ
Does the seal fit every exterior door?
For steel doors directly – for wood, PVC, and aluminum with the SMB 100 adapter hinge. Not for fire doors.
How do I find the right length?
Measure door width: select 1.0 m / 1.5 m / 2.5 m and cut to size on site.
Does this help against mice and insects?
Yes, the integrated rodent protection edge helps protect against unwanted guests. Proper installation and regular cleaning increase its effectiveness.
Do I have to drill?
No. Magnetic mounting – for non-magnetic frames, first apply the SMB 100, then apply the seal.
